Aspire Nautilus Coils (5-Pack) – BVC & Mesh

Aspire Nautilus Coils (5-Pack) – BVC & Mesh

Genuine Aspire Nautilus replacement coils, the Bottom Vertical Coil (BVC) and mesh heads for the Nautilus tank family: Nautilus, Nautilus Mini, 2, 2S, 3, 3S, 3²² and GT. These are not the smaller K1 / CE5 BVC coils; for those tanks, shop Aspire K1 / CE5-S BVC coils.

The Nautilus is one of the most popular mouth-to-lung tanks ever made, and these are the coils that keep it going. The vertical coil sits low in the tank so it stays wet, and organic cotton wicking gives cleaner flavor and longer life than Aspire's older BDC heads.

Pick the coil by the draw you like. The 1.6Ω and 1.8Ω heads give the classic tight Nautilus pull, and the 1.8Ω Salt Nic version is tuned for nic salts. The 0.7Ω and 1.0Ω mesh heads open it up for a warmer, airier draw, and the 0.3Ω and 0.4Ω heads are for direct-lung vaping.

Aspire Nautilus Coil Options

• 1.8Ω BVC – 10–14W. The classic all-round MTL Nautilus coil.
• 1.8Ω BVC Salt Nic – Optimized for nicotine salts.
• 1.6Ω BVC – Slightly warmer MTL draw.
• 1.0Ω Mesh – Smooth, warm MTL with mesh flavor.
• 0.7Ω BVC – 18–23W. Looser restricted-lung draw.
• 2S Mesh 0.7Ω – 20–25W. Designed for the Nautilus 2S.
• 0.4Ω – 23–28W. Direct-lung; made for the Nautilus 2S family.
• 0.3Ω Mesh – Direct-lung, higher wattage.

Aspire Nautilus Coils Specifications

• Resistances: 0.3Ω · 0.4Ω · 0.7Ω · 1.0Ω · 1.6Ω · 1.8Ω · 1.8Ω Salt Nic
• Coil type: Bottom Vertical Coil (BVC) and mesh
• Wick: Organic cotton
• Installation: Threaded (screw-in)
• Also known as: Nautilus BVC coils, Nautilus 2S coils, Nautilus 3 coils
• In the box: 5 coils, one type per pack

Use the wattage range printed on your coil and start at the low end.

Which Tanks Do Aspire Nautilus Coils Fit?

• Aspire Nautilus (original) · Nautilus Mini
• Aspire Nautilus 2S · Nautilus 3 · Nautilus 3S · Nautilus 3²²
• Aspire Nautilus GT · GT Mini
• Aspire Nautilus 2 – BVC coils only (0.7Ω and 1.8Ω); the 2S Mesh and 0.4Ω coils don't fit
• Aspire Nautilus AIO – not the 0.7Ω
• Aspire BOXX · MULUS · Zelos 3 · Plato · Triton Mini
• Aspire Nautilus Prime · Prime X pods

Nautilus BVC vs K1 BVC Coils

Aspire uses the name BVC on two different coil sizes. Nautilus BVC coils (this page) are the larger heads for Nautilus-family tanks. The smaller K1 / CE5-S BVC coils fit the K1, CE5, ET-S and Spryte. They aren't interchangeable.

How to Replace a Nautilus Coil

1. Unscrew the bottom section of the tank.
2. Unscrew the old coil and screw in the new one.
3. Drip a few drops of e-liquid into the top of the coil and onto the wicking holes.
4. Reassemble, refill, and wait 2–3 minutes before vaping so the cotton is fully soaked.

Aspire Nautilus Coils FAQ

Do Nautilus coils fit the Aspire K1, CE5 or Spryte?
No. Those tanks use the smaller K1 / CE5-S BVC coils.

Which Nautilus coil should I choose?
1.8Ω for the classic MTL draw, 1.8Ω Salt Nic for nic salts, 0.7Ω or 1.0Ω Mesh for a looser, warmer draw, and 0.3Ω or 0.4Ω for direct-lung.

What coil does the Nautilus 2S use?
The 2S Mesh 0.7Ω and the 0.4Ω were designed for the 2S. It also takes the standard 1.8Ω BVC.

Do Nautilus 2S coils fit the Nautilus 2?
No. Aspire lists the Nautilus 2 as compatible with the 0.7Ω and 1.8Ω BVC coils only.

How long do Nautilus coils last?
Typically 10–20 days, depending on e-liquid and use.

Want the full breakdown? Read Aspire Nautilus BVC Coils: Everything You Need to Know, or browse all replacement coils.

Please note: Due to the nature of this item, we cannot offer warranty, exchange or returns except if DOA.