Steam Turbine Rebuildable Genesis Style Atomizer - Stainless
$7.99
Skip to product information
Size:Height: 48.1mm (1.8")/Diameter : 20.8mm (0.82")
Please note: Due to the nature of this product, we cannot offer warranty, exchange or returns. This product is for experienced users and requires technical knowledge in order to properly use it.
Steam Turbine Clone Rebuildable Genesis Style Atomizer in Stainless CLEARANCE ITEM
The Steam Turbine by Tobeco is a beautiful, all stainless steel, 510 connection, rebuildable genesis style atomizer. It has single/dual coil and U-Wick build capabilities. It can be built with either stainless steel mesh or silica wick.The pyrex glass tank can hold up to 3ml of e-liquid. The Steam Turbine is completely sealed at the connector.
The Steam Turbine is very easy to disassemble as you simply grip the connector threads and pull off the cover which is sealed and kept in place by three screws.
The Steam Turbine comes with a drip tip and pre-installed wick and coil. You will also receive a packet containing extra wire, mesh, and a spare o-ring.
Size:Height: 48.1mm (1.8")/Diameter : 20.8mm (0.82")
Please Note: This item does not come with an instructional manual and is not intended for inexperienced users.
Warning on rebuildable atomizers, reprinted from the ECF website:
Please note very carefully that rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used.
2. If it is not tested it may damage the device it is used on.
3. Faulty wicks/coils WILL blow electronic devices.
4. New coil/wick units must be tested and then used first on a strong basic electrical APV such as a Silver Bullet, that will not be destroyed by a short circuit.
5. No new coil/wick assembly should be used on an electronic device until known to be safe.
6. These items destroy electronic devices if faulty. This is a known issue.
7. These items have inherent risks and may go faulty at any time even if they were originally in good working order. The owner bears the cost of equipment damaged as a result.
8. RAs, RDAs or RBAs must only be used on equipment that cannot be seriously damaged or harm the user. In practice this could mean an electrical device with a hot spring (fuse) or an electronic device that will not activate if there is a short-circuit (a dead short). Unfused devices or unprotected electronic devices will suffer damage when used with a faulty RA or RTA.