SMOK LP1 Replacement Coils (5-Pack) – Novo 4 & Nfix Pro

SMOK LP1 Replacement Coils (5-Pack)

Genuine SMOK LP1 coils, also called Novo 4 coils. They fit the SMOK Novo 4, Novo 4 Mini, Nfix Pro, Pozz Pro and RPM 25W. LP1 coils are not the same as LP2 coils, which are a larger coil for higher-power pods like the RPM 4.

LP1 coils press into the bottom of the pod, with no threading. They're low-wattage mouth-to-lung (MTL) and restricted-lung coils built for nic salts, so they pair with small pod kits that run around 10–25W.

Each pack holds five coils of the type you choose. The 0.8Ω Mesh is the all-rounder for flavor. The 0.8Ω DC MTL gives a warmer, tighter draw. The 0.9Ω Mesh MTL and 0.9Ω Turbo are the tightest MTL options, and the 1.2Ω Mesh is the lowest-power, longest-lasting choice.

SMOK LP1 Coils Key Features

• Five coil types – Mesh, dual coil (DC) and Turbo options from 0.8Ω to 1.2Ω
• Press-fit installation – Push into the pod; no threading
• Made for nic salts – Low wattage, smooth MTL and restricted-lung draws
• Genuine SMOK – Authentic coils, not clones

SMOK LP1 Coils Specifications

• LP1 0.8Ω Mesh: best around 12–15W
• LP1 0.8Ω DC MTL: 12–25W
• LP1 0.9Ω Mesh MTL: best around 15W
• LP1 0.9Ω Turbo Mesh MTL: best around 17W
• LP1 1.2Ω Mesh: 10–15W
• Installation: Press-fit
• Also known as: Novo 4 coils, Nfix Pro coils
• In the box: 5 coils, one type per pack

Which Devices Do SMOK LP1 Coils Fit?

• SMOK Novo 4 · Novo 4 Mini
• SMOK Nfix Pro
• SMOK Pozz Pro
• SMOK RPM 25W

LP1 vs LP2 Coils

LP1 and LP2 coils don't interchange. LP1 coils are the small, low-wattage coils on this page. LP2 coils are larger and made for higher-wattage pods. Check the name printed on your current coil or pod before ordering.

How to Replace a SMOK LP1 Coil

1. Take the pod out and pull the old coil out of the bottom.
2. Drip 2–3 drops of e-liquid into the top of the new coil.
3. Press the coil into the pod until it seats, then fill the pod.
4. Wait 5 minutes before vaping and take a few light puffs without firing first.

SMOK LP1 Coils FAQ

Why does my LP1 coil taste burnt?
The cotton usually wasn't fully soaked before the first puff, or the wattage is set too high. Prime the coil, wait 5 minutes after filling, and stay within the range above.

Which LP1 coil is best for nic salts?
The 0.9Ω Mesh MTL or 1.2Ω Mesh for a tight draw. The 0.8Ω Mesh if you want a bit more vapor.

Are Novo 4 coils and LP1 coils the same?
Yes. The Novo 4 uses LP1 coils.

How long do LP1 coils last?
Typically 5–10 days, depending on e-liquid and use.

Browse all replacement coils.

Please note: Due to the nature of this item, we cannot offer warranty, exchange or returns except if DOA.