Eleaf iStick Pico Plus 75W Kit
Grey
$46.95
Skip to product information
Eleaf iStick Pico Plus 75W Kit with Melo 4S Tank
The Eleaf iStick Pico Plus Kit is a box mod kit combined iStick Pico Plus box mod and Melo 4S Tank. Although more powerful in functionality, iStick Pico Plus is still comfortable to hold and fits easily in your pocket. For fast charging, iStick Pico Plus is equipped with USB Type-C and 2A charging current. This allows for a shorter time for charging and also allows you enjoy vaping more. iStick Pico Plus can output resistances from 0.3ohm to 3.5ohm. The modern chip set ensures ultimate safety, dry hit prevention and absolutely powerful performance. VW mode also provides TC mode for temperature control ranging from 100 to 315°C and Bypass mode. The Eleaf iStick Pico is powered by an 18650 size battery which is sold separately.
IStick Pico Plus retains the classic operating style of the iStick Pico series, using the firing button and the "+" and "-" selection buttons. The classic OLED monochrome display screen provides clear and visible information.
Melo 4S Tank (4ML) provides terrific flavor and thick clouds. It is equipped with convenient top filling system. Perhaps the biggest feature worth mentioning is that Melo 4S Tank utilizes the newly developed EC-A Series Coil. Super austenitic mesh winding stainless steel (AST-steel) is designed as the coil material, which delivers ultra rich and pure flavor in an instant and supports longer lifespan than ever. This high-quality stainless steel is corrosion-resistant, rust-free, durable and has a very fast heating speed evenly distributed heat, bringing you first-class taste and vapor experience. EC-A coil enters fresh air from the double-slotted airflow ring at the bottom of the tank, which can be continuously adjusted from DL to RDL through a wide air inlet : Eleaf EC-A 0.5ohm coils (Wattage Range: 20-40W), Eleaf EC-A 0.3ohm coils (Wattage Range: 30-50W) and Eleaf EC-A 0.15ohm coils (Wattage Range: 40-70W). Besides, with a wider 510 platform, iStick Pico Plus could accept tanks up to 25mm diameter.
Features
• Changeable 18650 mod with 75W output
• Powered by single 18650 battery (not include)
• USB Type-C and 2A fast charging
• Smart chip inside
• VW/Power, TC, Bypass mode
• OLED display screen
• Spring style 510 connector
• 4ml Melo 4S Tank
• Top Filling System
• New EC-A coils
• Innovative AST-steel for boosting flavor
• Smart coil protection without dry hits
• Adjustable bottom airflow system
• Design for DL & RDL vaping
Our standard 30 day warranty covers defective product.
Changing the coil on an Eleaf Melo 4 S tank is straightforward. Here's how to do it:
Removing the old coil
-
Unscrew the base of the tank from the glass/chimney section (twist counterclockwise). The Melo 4S uses a bottom-fill, bottom-coil design, so you access the coil from the base.
-
Empty out any remaining e-liquid into a cup or tissue to avoid spills.
-
Unscrew the old coil counterclockwise from the base — it screws in/out just like a standard 510-threaded coil.
Installing the new coil
-
Screw the new coil clockwise into the base until snug (don't overtighten).
-
Prime the coil: drip a few drops of e-liquid directly into the coil's wicking holes and let it sit for 5–10 minutes so the cotton fully saturates. This prevents dry hits and burnt taste on first use.
-
Reassemble the tank by screwing the base back onto the glass section.
-
Refill the tank through the top-fill or side-fill port (depending on your Melo 4S version), then let it sit a few more minutes before vaping.
Tips
-
Melo 4S typically uses EC/EC2 series coils (commonly 0.3Ω or 0.5Ω) — double-check the resistance printed on your old coil to order the matching replacement.
-
Start vaping at a lower wattage for the first few puffs to let the coil break in gradually.
-
If you get a burnt taste immediately, the coil may not have primed long enough or wasn't seated properly.